It would be a pleasure for us to get in touch with you for interesting discussions about textile testing equipment. Just fill out the form below for an E-mail request or call us directly by phone. For instructions on how to get to Lenzing Instruments for a personal encounter, please scroll down to see the needed information.
If you travel by car from Vienna or Salzburg on highway A1 take exit no. 234 “Seewalchen”. Leave the exit by turning left onto the B151 (Atterseestraße), thereafter turn left again onto road 1274 ‘(“Gamperner Bezirksstraße”). Shortly before you reach the intersection between road 1274 and B1 (roundabout traffic), you will see our building on the right-hand side and a sign for the “Technologie Industrie and Software park”, (short “tisp”). Turn to the right directly after the sign, therafter right again. Lenzing Instruments is the second building on the right-hand side. The distance between exit “Seewalchen” and Lenzing Instruments is approximately 7,5 km.
If you are heading south via Passau on highway A3 direction Linz, further on A8, at exit “Knoten Voralpenkreuz” go onto A1/E55/E60 direction Deutschland/Salzburg/ Eberstalzell, then go straight ahead until you reach exit no. 234 “Seewalchen. Thereafter follow the directions as above.
NOTE: If you use a navigation system, please enter destination “Technologiepark 4, 4851 Gampern, Austria”.
